Amathiphu okusetshenziswa kwesibonisi se-LED

Siyabonga ngokukhetha yethuIsibonisi se-LED.Ukuze uqinisekise ukuthi ungasebenzisa isibonisi se-LED ngokujwayelekile futhi uvikele amalungelo nezintshisekelo zakho, sicela ufunde izinyathelo zokuphepha ezilandelayo ngokucophelela ngaphambi kokuqala ukusebenzisa:

1. Ukuphatha isibonisi se-LED, izinyathelo zokuphepha zokuhamba

(1).Lapho uthutha, uphatha futhi ugcina isibonisi se-LED, landela ngokuqinile izimfuneko zokunqanda ukumaka emaphaketheni angaphandle, naka ukungqubuzana nokungqubuzana, ukuvikela amanzi nokuswakama, akukho ukuwa, indlela efanele, njll. Isibonisi se-LED iwumkhiqizo ontekenteke futhi owonakala kalula, sicela uwuvikele phakathi nokuwufaka.Ungangqongqozi endaweni ekhanyayo, kanye nendawo ezungezile ye-module ye-LED kanye nekhabhinethi, njll., ukugwema ukulimala ngenxa yokushaywa, futhi ekugcineni kubangele ukuthi ihluleke ukufakwa noma ukusetshenziswa ngokujwayelekile.Inothi elibalulekile: Imojula ye-LED ayikwazi ukungqubuzana, ngoba umonakalo wamaphedi wengxenye uzodala umonakalo ongalungiseki.

(2).Ukushisa kwemvelo yesitoreji se-LED: -30C≤T≤65C, umswakama 10-95%.I-LED ibonisa izinga lokushisa lendawo yokusebenza: -20C≤T≤45℃, umswakama 10-95%.Uma ungakwazi ukuhlangabezana nezidingo ezingenhla, sicela wengeze ukukhishwa kwe-humidification, Ukulawula izinga lokushisa, ukungena komoya kanye nezinye izinsiza kanye nemishini.Uma ukwakheka kwensimbi kwesikrini kuvaliwe ngokuqhathaniswa, kufanele kucatshangelwe ukungena komoya kanye nokuchithwa kokushisa kwesikrini, futhi imishini yokufaka umoya noma yokupholisa kufanele yengezwe.Ungawukhiphi umoya ofudumele ongaphakathi endliniisikrini se-LED esiguquguqukayo.

Inothi elibalulekile: Ukuwohloka kwesikrini se-LED sasendlini kuzodala isikrini sibe umonakalo ongalungiseki.

2.Izinyathelo zokuqapha ugesi zibonisa i-LED

(1).Izidingo zamandla kagesi wesibonisi se-LED: idinga ukuhambisana ne-voltage yesibonisi samandla, 110V/220V±5%;imvamisa: 50HZ ~ 60HZ;

(2).Imojula ye-LED inikwe amandla yi-DC +5V (i-voltage yokusebenza: 4.2 ~ 5.2V), futhi inqatshelwe ukusebenzisa amandla kagesi we-AC;izigxobo ezinhle nezimbi zamatheminali amandla zinqatshelwe ngokuphelele ukuguqulwa (inothi: uma usuhlehlisiwe, umkhiqizo uzoshisa futhi ubangele nomlilo onzima);

(3).Uma amandla aphelele wesibonisi se-LED engaphansi kuka-5KW, i-voltage yesigaba esisodwa ingasetshenziselwa ukunikezwa kwamandla;uma likhulu kuno-85KW, kudingeka ukuthi kusetshenziswe ibhokisi lokusabalalisa amandla kagesi lezintambo ezinhlanu lezigaba ezintathu, futhi umthwalo wesigaba ngasinye ulingana ngokulinganayo ngangokunokwenzeka;ibhokisi lokusabalalisa kufanele libe nokufinyelela kocingo oluphansi, futhi uxhumano nomhlabathi lunokwethenjelwa, futhi ucingo oluphansi kanye nentambo engathathi hlangothi ayikwazi ukufinyezwa;ibhokisi lokusabalalisa amandla lidinga ukuvikelwa kahle ekuvuzeni kwamandla, futhi izinto zokuvikela ezifana nezibambisi zombani zidinga ukuxhunywa, futhi ukunikezwa kwamandla okuxhunyiwe kufanele kugcinwe kude nezinto zikagesi ezinamandla amakhulu .

(4).Ngaphambi kokuthi isibonisi se-LED sivulwe, kuyadingeka ukuthi kubhekwe ukuxhumeka kwekhebula lamandla amakhulu nezintambo zikagesi phakathi kwamakhabethe, njll., akumele kube khona ukuxhumana okungalungile, ukuhlehla, ukujikeleza okufushane, ukujikeleza okuvulekile, ukuxega, njll. , futhi usebenzise i-multimeter namanye amathuluzi ukuze uhlole futhi uqinisekise.Ngaphambi kwanoma yimuphi umsebenzi wokulungisa, sicela unqamule wonke amandla aku-risibonisi se-LED sangaphakathiukuze uqinisekise ukuphepha kwakho kanye nezinto zokusebenza.Zonke izinto zokusebenza nezintambo zokuxhuma azivunyelwe ekusebenzeni bukhoma.Uma kukhona okungavamile okufana ne-short circuit, ukukhubeka, intambo evuthayo, kutholakala intuthu, ukuhlolwa kwamandla akufanele kuphindwe, futhi inkinga kufanele itholakale ngesikhathi.

3.Ukufakwa kwesibonisi se-LED nezinyathelo zokuphepha zokunakekelwa

(1).Lapho i-i-LED engaguqukiiKhabhinethi ifakiwe, sicela ushisele isakhiwo sensimbi kuqala, uqinisekise ukuthi isakhiwo sisekelwe phansi, futhi uqede ugesi ongashintshi;ngemva kokuqinisekisa ukuthi ifanelekile, faka isibonisi se-LED kanye nomunye umsebenzi wokulandelela.Pay ukunaka:ukushisela ngenkathi ufaka noma wengeza i-welding ngemva kokuphela kokufakwa.Ukushisela, ukuvimbela i-slag yokushisela, ukusabela kwe-electrostatic kanye nomunye umonakalo ezingxenyeni zangaphakathi zesibonisi se-LED, futhi isimo esibucayi singabangela ukuba imojula ye-LED ichithwe.Lapho iKhabhinethi ye-LED ifakiwe, iKhabhinethi ye-LED emgqeni wokuqala phansi kufanele ihlanganiswe kahle ukuze kuqinisekiswe ukuthi azikho izikhala ezicacile kanye nokukhishwa ngaphambi kokuqhubeka nokuhlangana phezulu.Lapho ufaka futhi ugcina isibonisi se-LED, kuyadingeka ukuhlukanisa futhi uvale indawo engase iwe.Ngaphambi kokukhipha, sicela ubophe intambo yokuphepha kumojuli ye-LED noma iphaneli ehambisanayo ukuze uyivimbele ukuthi ingawi.

(2).Isibonisi se-LED sinokuvumelana okuphezulu.Ngesikhathi sokufaka, ungabi nawo upende, uthuli, i-welding slag nokunye ukungcola okunamathela endaweni yokukhanya yemojuli ye-LED noma indawo yesibonisi se-LED, ukuze ungaphazamisi umphumela wokubonisa we-LED.

(3).Isibonisi se-LED akufanele sifakwe eduze kolwandle noma ngasemanzini.Inkungu ephezulu kasawoti, izinga lokushisa eliphezulu kanye nomswakama ophezulu kungabangela kalula izingxenye zesibonisi ze-LED ukuba zibe manzi, zenziwe nge-oxidized futhi zigqwale.Uma kudingekile ngempela, kuyadingeka ukuxhumana nomkhiqizi kusengaphambili ukwenza ukwelashwa okukhethekile kobufakazi obuthathu futhi wenze umoya omuhle, ukukhishwa kwe-humidification, ukupholisa kanye neminye imisebenzi.

(4).Ibanga elincane lokubuka lesibonisi se-LED = iphikseli pitch (mm) * 1000/1000 (m), ibanga lokubuka elilungile = ukuphakama kwephikseli (mm) * 3000/1000 (m), ibanga lokubuka elikude = ubude bokubonisa kwe-LED * 30 (m).

(5).Lapho ukhipha noma uxhuma ikhebula, ikhebula lamandla angu-5V, ikhebula lenethiwekhi, njll., ungayidonsi ngokuqondile.Cindezela ikhanda elicindezelayo lentambo yeribhoni ngeminwe emibili, inyakazise kwesokunxele nakwesokudla bese uyikhipha kancane.Kokubili ikhebula lamandla kanye nekhebula ledatha kudinga ukucindezelwa ngemva kwebhande.Lapho ukhipha i-plug, intambo yekhanda lendiza ngokuvamile iwuhlobo lwe-snap.Uma ukhipha futhi uxhuma, sicela uhlole ngokucophelela isiqondiso esikhonjisiwe bese ubhangqa izihloko zabesilisa nabesifazane.Ungabeki izinto ezisindayo ezintamboni ezifana nezintambo zikagesi, izintambo zesignali, nezintambo zokuxhumana.Gwema ikhebula ukunyathelwa ngokujulile noma ukuminyanisa, ingaphakathi lesibonisi se-LED akumele lixhunywe kukhebula ngokunganaki.

4. Tusebenzisa izinyathelo zokuqapha imvelo yesibonisi se-LED

(1).Qaphela indawo ezungezile yesibonisi se-LED kanye nengxenye yokulawula, gwema umzimba wesibonisi we-LED kusukela ekulunyweni yizinambuzane namagundane, futhi ubeke umuthi wokulwa namagundane uma kudingeka.Uma izinga lokushisa le-ambient liphezulu kakhulu noma izimo zokukhipha ukushisa zingezinhle, kufanele uqaphele ukuthi ungasivuli isibonisi se-LED isikhathi eside.

(2).Uma ingxenye yesibonisi se-LED ibonakala ikhanya kakhulu, kufanele unake ukuvala isibonisi se-LED ngesikhathi.Kulesi simo, akufanelekile ukuvula isibonisi se-LED isikhathi eside.

(3).Uma kuvamise ukuqinisekiswa ukuthi ukushintshwa kwamandla kwesibonisi se-LED kuwisiwe, isibonisi se-LED kufanele sihlolwe noma iswishi yamandla kufanele ishintshwe ngesikhathi.

(4).Hlola njalo ukuqina koxhumo lwesibonisi se-LED.Uma kukhona ukuxega, kufanele ukulungise ngesikhathi.Uma kunesidingo, ungaphinda uqinise noma ushintshe isiphanyeko.

(5).Qaphela indawo ezungezile yesibonisi se-LED kanye nengxenye yokulawula, gwema umzimba wesibonisi we-LED ukuthi ungalunywa yizinambuzane, futhi ubeke umuthi wokulwa namagundane uma kudingeka.

 

5.Izinyathelo zokuphepha zokusebenza kwesoftware yokubonisa i-LED

(1).Isibonisi se-LED sinconywa ukuthi sifakwe ikhompuyutha ezinikele, ifake isofthiwe engahlobene nesibonisi se-LED, futhi ihlale ibulala amagciwane amanye amathuluzi okulondoloza njenge-U disk.Sebenzisa noma udlale noma ubuke amavidiyo angabalulekile kuyo, ukuze ungaphazamisi umphumela wokudlala, futhi abasebenzi abangebona abaqeqeshiwe abavunyelwe ukuqaqa noma ukuhambisa okokusebenza okuhlobene nesibonisi se-LED ngaphandle kokugunyazwa.Abasebenzi abangebona abasebenzi abakwazi ukusebenzisa isistimu yesofthiwe.

(2).Isofthiwe eyisipele njengezinhlelo zohlelo lokusebenza, izinhlelo zokufakwa kwesofthiwe, kanye nemininingwane yolwazi.Ichwepheshile endleleni yokufaka, ukutholwa kwedatha yasekuqaleni, izinga lokulondoloza.Ingcweti yokusethwa kwamapharamitha okulawula kanye nokuguqulwa kokusethwa ngaphambilini kwedatha okuyisisekelo.Ukwazi ukusebenzisa, ukusebenzisa nokuhlela izinhlelo.Njalo hlola amagciwane futhi ususe idatha engabalulekile.

6. Izinyathelo zokuphepha zokushintsha kwesibonisi se-LED

1. Ukulandelana kokushintsha isibonisi se-LED: Ukuvula isibonisi se-LED: Sicela uvule ikhompuyutha kuqala, bese uvula amandla esibonisi se-LED ngemva kokungena ohlelweni ngokujwayelekile.Gwema ukuvula isibonisi se-LED esimweni sesikrini esimhlophe esigcwele, ngoba yisimo esiphezulu samandla ngalesi sikhathi, kanye nomthelela wawo wamanje kulo lonke uhlelo lokusabalalisa amandla Ubukhulu;Ukuvala isibonisi se-LED: Okokuqala vala amandla omzimba wesibonisi se-LED, vala isofthiwe yokulawula, bese uvala ikhompuyutha ngendlela efanele;(Vala ikhompuyutha kuqala ngaphandle kokuvala isibonisi se-LED, okuzokwenza ukuthi isibonisi se-LED sibonakale sinamabala agqamile, sishise isibani, futhi imiphumela izoba mibi)

7. Izinyathelo zokuqapha ngokusebenza kwesilingo se-LED entshaisibonisi

(1).Imikhiqizo yasendlini: A. Isibonisi se-LED esisha esigcinwe phakathi nezinyanga ezi-3 singadlalwa ngokukhanya okuvamile;B. Ukuze uthole isibonisi esisha se-LED esilondolozwe isikhathi esingaphezu kwezinyanga ezi-3, setha ukukhanya kwesikrini kube ku-30% okokuqala ngqa sivulwa, sebenzisa ngokuqhubekayo amahora angu-2, vala isigamu sehora, usikhanyise futhi. setha ukukhanya kwesikrini kube ngu-100%, sisebenzise ngokuqhubekayo amahora angu-2, bese ubheka ukuthi isikrini se-LED sijwayelekile yini.Ngemuva kokujwayelekile, setha ukukhanya kwesikrini ngokwezidingo zekhasimende.

(2).Imikhiqizo yangaphandle ingafaka futhi isebenzise isikrini ngokujwayelekile.

(Isibonisi se-LED siwumkhiqizo we-elekthronikhi, kuyatuswa ukuthi uvule isibonisi se-LED ukuze sisebenze njalo.) Ngombukiso we-LED wasendlini ofakiwe futhi wacishwa izinsuku ezingaphezu kweziyi-15, yehlisa ukukhanya kwesibonisi se-LED nokuguga kwevidiyo. uma uyisebenzisa futhi.Ngohlelo, sicela ubhekisele ku-NO engenhla.7 (B) Ngesikhathi sokusebenza kwesilingo sesibonisi esisha se-LED, asikwazi ukugqanyiswa futhi siqhubeke sisebenza ngokumhlophe.Ngombukiso we-LED wangaphandle ofakwe futhi wacishwa isikhathi eside, sicela uhlole izimo zangaphakathi zesibonisi se-LED ngaphambi kokuvula isibonisi se-LED.Uma KULUNGILE, ingavulwa ngokujwayelekile.