Iingcebiso malunga nokusetyenziswa koMboniso we-LED

Enkosi ngokukhetha yethuUmboniso we-LED.Ukuqinisekisa ukuba ungasebenzisa isiboniso se-LED ngokwesiqhelo kwaye ukhusele amalungelo akho kunye nomdla, nceda ufunde la manyathelo okhuseleko ngononophelo ngaphambi kokuba uqalise ukusebenzisa:

1. Ukuphathwa kwesiboniso se-LED, ukunyathela ukuthutha

(1).Xa uhambisa, ukuphatha nokugcina umboniso we-LED, landela ngokungqongqo iimfuno zokuchasana nokumakisha kwipakethe yangaphandle, nikela ingqalelo kwi-anti-collision kunye ne-anti-bumping, i-waterproof kunye nomswakama-ubungqina, akukho ukulahla, ulwalathiso oluchanekileyo, njl. yimveliso ebuthathaka kwaye eyonakaliswe lula, nceda uyikhusele ngexesha lofakelo.Musa ukunkqonkqoza kwindawo yokukhanya, kunye nokujikeleza kwemodyuli ye-LED kunye nekhabhinethi, njl., Ukuphepha umonakalo ngenxa yokubetha, kwaye ekugqibeleni kubangele ukuba ingaphumeleli ukufakwa okanye ukusetyenziswa ngokuqhelekileyo.Inqaku elibalulekileyo: Imodyuli ye-LED ayinakutshitshiswa, kuba umonakalo kwiipads zecandelo kuya kubangela umonakalo ongenakulungiswa.

(2).Ubushushu bendawo yogcino lwe-LED: -30C≤T≤65C, ukufuma 10-95%.Ubushushu be-LED bubonisa indawo yokusebenza: -20C≤T≤45℃, umswakama 10-95%.Ukuba awukwazi ukuhlangabezana nezi mfuno zingentla, nceda ungeze ukucima, ukulawulwa kokushisa, ukungena komoya kunye nezinye izixhobo kunye nezixhobo.Ukuba isakhiwo sensimbi yesikrini sivaliwe ngokulinganayo, ukukhupha umoya kunye nokutshatyalaliswa kokushisa kwesikrini kufuneka kuqwalaselwe, kunye nezixhobo zokupholisa okanye zokupholisa kufuneka zongezwe.Musa ukukhupha umoya oshushu wangaphakathi ngaphakathiisikrini se-LED esiguqukayo.

Inqaku elibalulekileyo: Ukuthotywa kwesikrini se-LED sangaphakathi kuya kubangela ukuba isikrini sibe ngumonakalo ongenakulungiseka.

2.Izilumkiso zombane zokubonisa i-LED

(1).Iimfuno zamandla ombane ombane womboniso we-LED: kufuneka zihambelane nombane wombane wokubonisa umbane, 110V/220V±5%;rhoqo: 50HZ ~ 60HZ;

(2).Imodyuli ye-LED inikwe amandla yi-DC + 5V (i-voltage yokusebenza: 4.2 ~ 5.2V), kwaye ayivunyelwe ukusebenzisa umbane we-AC;izibonda ezintle kunye nezibi zee-terminals zamandla zinqatshelwe ngokungqongqo ukuguqulwa (qaphela: emva kokuguqulwa, umkhiqizo uya kutshisa kwaye ubangele umlilo omkhulu);

(3).Xa amandla apheleleyo omboniso we-LED angaphantsi kwe-5KW, i-voltage yesigaba esisodwa ingasetyenziselwa ukunikezelwa kwamandla;xa ingaphezulu kwe-85KW, kuyafuneka ukuba kusetyenziswe ibhokisi yokuhambisa amandla ombane wesigaba esithathu, kwaye umthwalo wesigaba ngasinye unomndilili kangangoko;ibhokisi yokusabalalisa kufuneka ibe nokufikelela kwintambo yomhlaba, kwaye ukudibanisa nomhlaba kunokwethenjelwa, kunye nocingo oluphantsi kunye nocingo olungathathi hlangothi alukwazi ukuba lufutshane;ibhokisi yokuhambisa amandla kufuneka ikhuselwe kakuhle ekuvuzeni kwangoku, kwaye izixhobo zokukhusela ezifana nokubambisa umbane kufuneka zixhunywe, kwaye umbane odibeneyo kufuneka ugcinwe kude nezixhobo zombane eziphezulu.

(4).Ngaphambi kokuba isiboniso se-LED sivulwe, kuyafuneka ukujonga uqhagamshelo lweyona ntambo yamandla iphambili kunye neentambo zamandla phakathi kweekhabhathi, njl. , kwaye usebenzise i-multimeter kunye nezinye izixhobo zokuvavanya kunye nokuqinisekisa.Ngaphambi kwawo nawuphi na umsebenzi wokulondoloza, nceda unqumle onke amandla kwi-rumboniso we-LED wangaphakathiukuqinisekisa ukhuseleko lwakho kunye nezixhobo.Zonke izixhobo kunye neengcingo zokudibanisa azivumelekanga ekusebenzeni okuphilayo.Ukuba kukho nakuphi na okungaqhelekanga okufana nokujikeleza okufutshane, ukukhubeka, ucingo oluvuthayo, umsi ufunyenwe, uvavanyo lombane akufanele luphindwe, kwaye ingxaki kufuneka ifunyanwe ngexesha.

3.Ukufakwa kwesiboniso se-LED kunye namanyathelo okukhusela

(1).Xa ii-LED esisigxinaikhabhinethi ifakwe, nceda udibanise isakhiwo sentsimbi kuqala, uqinisekise ukuba isakhiwo sisekelwe, kwaye uphelise umbane ongatshintshiyo;emva kokuqinisekisa ukuba ifanelekile, faka umboniso we-LED kunye nomnye umsebenzi wokulandelela.PAy ingqalelo ku:i-welding ngelixa ufaka okanye ufaka i-welding emva kokuba ukufakela kugqityiwe.I-Welding, ukuthintela i-welding slag, i-electrostatic reaction kunye nomnye umonakalo kwizinto zangaphakathi zesiboniso se-LED, kwaye imeko enzima inokubangela ukuba imodyuli ye-LED ikhutshwe.Xa ikhabhinethi ye-LED ifakwe, ikhabhinethi ye-LED kumqolo wokuqala ngasezantsi kufuneka ihlanganiswe kakuhle ukuze kuqinisekiswe ukuba akukho zithuba ezicacileyo kunye nokuchithwa ngaphambi kokuqhubeka nokuhlanganisana phezulu.Xa ufaka kunye nokugcina umboniso we-LED, kuyimfuneko ukuhlukanisa kwaye utywine indawo enokuthi iwe.Ngaphambi kokuba ususe, nceda ubophe intambo yokhuseleko kwimodyuli ye-LED okanye ipaneli ehambelanayo ukuyikhusela ukuba ingawi.

(2).Umboniso we-LED unokuhambelana okuphezulu.Ngexesha lofakelo, ungabi nepeyinti, uthuli, i-welding slag kunye nolunye ukungcola okunamathela kwimodyuli yokukhanya kwe-LED okanye ubuso bomboniso we-LED, ukuze ungachaphazeli umphumo we-LED.

(3).Umboniso we-LED akufanele ufakwe kufuphi nolwandle okanye emanzini.Inkungu ephezulu yetyuwa, ubushushu obuphezulu kunye nokufuma okuphezulu kunokubangela ukuba izinto zokubonisa i-LED zibemanzi, zibe ne-oxidized kwaye zidle.Ukuba kuyimfuneko ngokwenene, kuyimfuneko ukunxibelelana nomenzi kwangaphambili ukwenza unyango olukhethekileyo lobungqina obuthathu kwaye wenze umoya ococekileyo, ukucima, ukupholisa kunye nomnye umsebenzi.

(4).Ubuncinci umgama wokujonga umboniso we-LED = i-pixel pitch (mm) * 1000/1000 (m), umgama ofanelekileyo wokujonga = i-pixel pitch (mm) * 3000/1000 (m), umgama wokujonga okude = ubude bomboniso we-LED * 30 (m).

(5).Xa ukhupha okanye udibanisa ikhebula, ikhebula lamandla e-5V, intambo yenethiwekhi, njl., musa ukuyitsala ngokuthe ngqo.Cinizela intloko yoxinzelelo lwentambo yeribhoni ngeminwe emibini, yigubungele ngakwesobunxele nangakwesokudla kwaye ngokukhawuleza uyikhuphe.Zombini intambo yamandla kunye nekhebula ledatha kufuneka icinezelwe emva kwebhanti.Xa ukhupha iplagi, ucingo lwentloko yenqwelomoya ngokuqhelekileyo luhlobo lwe-snap.Xa ukhupha kunye neplagi, nceda ujonge ngokucophelela isalathiso esibonisiwe kwaye udibanise iintloko zesilisa kunye nesetyhini.Musa ukubeka izinto ezinzima kwiintambo ezifana neentambo zombane, iintambo zomqondiso, kunye neentambo zonxibelelwano.Gwema ukuba intambo inyathelwe ngokunzulu okanye icinezelwe, ingaphakathi lesiboniso se-LED akufanele lidityaniswe ngokungqongqo kwintambo.

4. Tusebenzisa izilumkiso zokusingqongileyo zokubonisa i-LED

(1).Qwalasela imo engqongileyo ye-LED ebonisa umzimba kunye nenxalenye yolawulo, thintela umzimba wokubonisa i-LED ukuba ungalunywa zizinambuzane kunye neempuku, kwaye ubeke iyeza lokulwa namabuzi ukuba kukho imfuneko.Xa ubushushu be-ambient buphezulu kakhulu okanye iimeko zokulahla ubushushu zingalunganga, kufuneka uqaphele ukuba ungavuli isiboniso se-LED ixesha elide.

(2).Xa inxalenye yesibonisi se-LED ibonakala ikhanya kakhulu, kufuneka ubeke ingqalelo ekuvaleni umboniso we-LED ngexesha.Kule meko, ayifanelekanga ukuvula umboniso we-LED ixesha elide.

(3).Xa kusoloko kuqinisekiswa ukuba ukutshintshelwa kwamandla kwesibonisi se-LED kukhutshiwe, umzimba wokubonisa i-LED kufuneka uhlolwe okanye ukutshintshwa kwamandla kufuneka kufakwe endaweni ngexesha.

(4).Jonga rhoqo ukuqina koqhagamshelo lwe-LED.Ukuba kukho nakuphi na ukukhululeka, kufuneka uyilungise kwangexesha.Ukuba kuyimfuneko, unokuphinda uqinise okanye utshintshe i-hanger.

(5).Qwalasela indawo engqonge umzimba womboniso we-LED kunye nenxalenye yolawulo, thintela umzimba wokubonisa i-LED ekubeni ungalunywa zizinambuzane, kwaye ubeke iyeza lokuchasa amabuzi ukuba kukho imfuneko.

 

5.Imiboniso ye-LED yokusebenza kwenkqubo yokhuseleko

(1).Umboniso we-LED ucetyiswa ukuba uxhotyiswe ngekhompyuter ezinikeleyo, ufake isoftware engahambelani nesiboniso se-LED, kwaye rhoqo iintsholongwane kwezinye izixhobo zokugcina ezifana ne-U disk.Sebenzisa okanye udlale okanye ubukele iividiyo ezingabalulekanga kuyo, ukuze ungachaphazeli umphumo wokudlala, kunye nabasebenzi abangengabo abachwephesha abavumelekanga ukuba bachithe okanye bahambise izixhobo ezinxulumene nomboniso we-LED ngaphandle kokugunyaziswa.Abasebenzi abangezongcali abanakukwazi ukusebenzisa inkqubo yesoftware.

(2).I-software ye-backup efana neenkqubo zesicelo, iinkqubo zokufakela i-software, kunye ne-database.Ubuchule kwindlela yokufakela, ukubuyiswa kwedatha yangaphambili, inqanaba lokugcina.Isetingi solawulo lweeparamitha kunye nohlengahlengiso lwesiseko sedatha esetwe kwangaphambili.Unobuchule bokusebenzisa, ukusebenza kunye nokuhlela iinkqubo.Jonga rhoqo iintsholongwane kwaye ucime idatha engabalulekanga.

6. Izilumkiso zokutshintsha umboniso we-LED

1. Ulandelelwano lokutshintsha umboniso we-LED: Ukuvula umboniso we-LED: Nceda uvule ikhompyutha kuqala, uze uvule amandla omboniso we-LED emva kokungena kwinkqubo ngokuqhelekileyo.Kuphephe ukuguqula umboniso we-LED kwimeko yesikrini esimhlophe esigcweleyo, kuba ngumbuso wamandla aphezulu ngeli xesha, kunye nempembelelo yayo yangoku kuyo yonke inkqubo yokusabalalisa amandla Ubuninzi;Ukucima umboniso we-LED: Okokuqala cima amandla omboniso we-LED, cima isofthiwe yokulawula, uze uvale ikhompyutha ngokuchanekileyo;(Cima ikhomputha kuqala ngaphandle kokucima umboniso we-LED, oya kubangela ukuba umboniso we-LED ubonakale amabala aqaqambileyo, utshise isibane, kwaye iziphumo ziya kuba zibi)

7. Imigqaliselo yokusebenza kovavanyo lwe-LED entshaumboniso

(1).Iimveliso zangaphakathi: A. Umboniso omtsha we-LED ogcinwe kwiinyanga ezi-3 unokudlalwa ekukhanyeni okuqhelekileyo;B. Umboniso omtsha we-LED ogcinwe ngaphezu kweenyanga ezi-3, setha ukukhanya kwesikrini ukuya kwi-30% okokuqala ngqa ivuliwe, iqhube ngokuqhubekayo kwiiyure ze-2, ivale isiqingatha seyure, yivule kwaye seta ukukhanya kwesikrini ukuya kwi-100%, yiqhube ngokuqhubekayo iiyure ezi-2, kwaye uqaphele ukuba isikrini se-LED siqhelekile.Emva kwesiqhelo, seta ukukhanya kwesikrini ngokweemfuno zomthengi.

(2).Iimveliso zangaphandle zinokufaka kwaye zisebenzise isikrini ngokuqhelekileyo.

(Umboniso we-LED yimveliso ye-elektroniki, kucetyiswa ukuba uvule umboniso we-LED ukuba usebenze rhoqo.) Ukubonisa i-LED yangaphakathi efakwe kwaye ivaliwe ngaphezu kweentsuku ze-15, ukunciphisa ukukhanya kwe-LED kunye nokuguga kwevidiyo. xa usebenzisa kwakhona.Ngenkqubo, nceda ubhekiselele ngasentla NO.I-7 (B) Ngethuba lokusebenza kwesilingo somboniso omtsha we-LED, ayinakugqanyiswa kwaye iqhube ngokuqhubekayo emhlophe.Ukubonisa i-LED yangaphandle efakwe kwaye ivaliwe ixesha elide, nceda ujonge iimeko zangaphakathi zesiboniso se-LED ngaphambi kokuba uvule umboniso we-LED.Ukuba KULUNGILE, inokuvulwa ngesiqhelo.